Parts for Valves and Fittings |
Butterfly Valve Seats Our seats will work ONLY on valves that meet ALL of these criteria
Put long stem through first, then stretch seat to get over the small stem. This is easy with larger valves but can be difficult with 1" valve. For 1", put the seat in a vise---squeeze the seat to stretch it. |
Size |
|
1" |
||
1.5" |
||
2" |
||
2.5" |
||
3" |
||
4" |
||
Stainless Steel Handle for Butterfly Valve 12-positions in 180° |
1 to 3" |
|
4" |
||
Orings for Wine Ball Valves 2 orings per valve. Teflon seats should never wear out. |
1.5" |
|
2" |
Sight Glass Parts First, insure the sight glass has Stpats.com stamped on it. If it does not, then these parts will not work. Second, if the valve does not have black gaskets, then these parts will not work. You can also measure the length of the glass to be sure you are getting the correct part. |
size |
Borosilicate glass |
gaskets--BLACK EPDM |
1" |
1.5" |
2" |
3" |
Replacement Gasket for Female TC x Cam & Groove Adapter | size |
|
1.5" |
||
2" |
||
3" |