Control panel of Euro-40-FD-T. Freq drive pump with timer.
The controls at top of panel are common to all Enoitalia Freq Drive pumps. They include red ON/OFF, Local/Remote selector, yellow fault light, CW and CCW selector, and speed variation knob. The two controls at lower right are unique to pumps with timer.

Timer controls. Timer selector switch at top. Turn to MAN if you are not using the timer. Turn to AUTO if you are using the timer.

Setting duration and frequency of pump operation.

Upper left: "OFF" and "ON" lights simply indicate if pump is off or on.

Lower left: RANGE Selector. The range selected in the photo is 0-12. There are 3 other choices: 0-1.2, 0-3, and 0-30. Use small screwdriver to change the range.

Upper right: OFF SCALE selector. Choices are second, 10 seconds, minute, and hour. For example, if hour is chosen, then the dial in the photo is 0-12 hours.

Lower right. ON SCALE selector.

Dial: Green Pointer indicates OFF duration. Red Pointer indicates ON duration. In the photo, the pump will be off for 2 hours, then run for two hours, .....

Example. Assume that you want pumpover for 20 minutes every 8 hours.
Set RANGE selector (lower left) to 0-30.
Set OFF SCALE (upper right) to hours. Turn green pointer to 8 (pump will be off for 8 hours).
Set ON SCALE (lower right) to minutes. Turn red pointer to 20 (pump will be on for 20 minutes).