Changing the bands on Foil Spinner.

This is the same spinner that is one the Upright. Secure unit firmly to bench because it takes a bit of force to push bottle into spinner. If the operator finds this to be too difficult, you can remove 2 of the 5 rubber bands to make it easier.

Remove cover. Use pliers to remove end piece (1) (turn CCW). Phillips screwdriver to remove three screws (2) on end plate. Remove yellow discs. No. ? Allen wrench to remove bolt (3). Use two screwdrivers to pry brass assembly off shaft. Remove 2 of the 5 black rubber bands and space the remaining three at top, middle, and bottom (as shown in photo). Reassemble.