All Parts on this page MUST be ordered ONLINE---no phone orders.
PF30 20x20 Plate-and-Frame Filter discontinued
We have discontinued 20x20 plate and frame filters. A 30" triple cartridge filter has comparable capacity to 30-40 sheets (20x20), and is easier to set up and clean.
Double Filtration Set $150 
Permits the simultaneous use of filter sheets of different porosity. For example, V4 followed by V18.
Consists of a stainless
steel plate and two plastic end plates (both male) with gaskets.
Please note: Double Filtration Set may not work with other filters. (There must be an outlet on the stainless steel endplate on the handwheel side
of filter. )
Replacement Parts for PF30
Center Plate $20
End Plate-Pump Side (female) $25
End Plate-HandWheel Side (male) $25
Silicone Center Plate Gasket—EXTRA THICK
$2
(We had extra thick gaskets made to make sealing easier.)
Silicone Center Plate Gasket— THICK $1.50 sold out
Silicone End Plate Gasket—THIN $2
Pressure Gauge $30
1/4" MPT, 2" face, 0-60psi
Threaded Brasss Bushing $30
(M16x2)
This part is stripped as a result of overtightening. Experienced users get virtually no drips without overtightening. This part is also used on Spadoni 20x20 but NOT on Marchisio 20x20 filters.
The pump on 20x20 filter is Jet05. Jet05 Parts
Drain the pumphead after use. This is the most important maintenance. Water, especially with chemicals, can corrode the seals if left in the pumphead